Reflective Insulation, House Wrap, Moisture Barriers & Netting

Tyvek House Wrap

DuPont™ Tyvek® HomeWrap® is the original house wrap, incorporating unique material science that helps keep air and water out, while letting water vapor escape. As a result, it can contribute to improved building durability by helping to protect homes against damaging wind and rain that can penetrate the exterior cladding. Tyvek® HomeWrap® can also reduce home energy bills by controlling air flow and water intrusion, which helps insulation work better, allowing the HVAC system to work more efficiently. It’s a house wrap engineered to keep homes cool in the summer, warm in the winter, and dry all year round.

 

 

NT Radiant Barrier

Radiant Barrier for attics is a perforated sheet of a single layer of polyethylene reinforcing scrim, boned to – and sandwiched between – two highly reflective metalized sheets. Roll comes in 4’x250’ NT Radiant Barrier.

 

Reflective Single Bubble Insulation

Radiant Barrier for attics is a perforated sheet of a single layer of polyethylene reinforcing scrim, boned to – and sandwiched between – two highly reflective metalized sheets. Roll comes in 4’x250’ NT Radiant Barrier.

 

Poly Sheeting

Poly sheeting is used as a moisture barrier in basements and crawlspaces. It is used also as a protective covering for lumber, walls, and scaffolding. Black Poly is also used in construction, masonry, and landscaping.
Poly sheeting comes in the following options:
– 0.7 mil Poly (9’x400’ clear)
– 1.5 mil Poly (8’4”x200 clear)
– 4 mil Poly (10’x100’ clear)
– 6 mil Poly (10’ or 20’ x 100’) clear and black
– 6 mil Poly (20’x100’ white)

 

Viper

Viper is used for more demanding applications requiring high tear resistance. A heavy scrim reinforcement placed between plies greatly enhances tear resistance and increases service life. We offer 6.5, 10, and 16 mil in 12' x 100' rolls. Black and White.

 

Radiant barrier insulation

 

We offer more than 200 linear feet of breathable (perforated) pure aluminum foil radiant barrier insulation that reflects 97% of radiant heat

It is widely used in retrofit & new construction. This radiant barrier insulation reduces residential attic temperatures by up to 40 degrees and lowers utility bills all year long. There are many uses for thermal insulation, including attics, garages, garage doors, house wrap, workshops, sheds, storage units, commercial metal buildings, pallet wrap, and more.

Moreover, it is torn and puncture-resistant yet cuts easily with utility scissors or a hacksaw.

The material is non-toxic, non-carcinogenic, fiber-free, easy to install, not affected by humidity, does not support the growth of fungi or bacteria, and does not support nesting by rodents or insects. 

Please note: Prior to installation, the product must be stored in a clean, and dry environment.